Choosing Film for Confectionery Packaging: Moisture Barrier and Machine Compatibility

When the right machine meets the wrong film, the packaging line neither speeds up nor protects the product. Film selection determines the efficiency of the packaging machine as much as the product's shelf life.
Confectionery products are affected by moisture and light. Packaging film must limit these effects while also running smoothly on the packaging machine. To choose a film that meets both expectations, the following properties are considered.
Key Film Properties
- Moisture permeability: The most important property for hard candy; low moisture transmission extends shelf life.
- Sealing properties: In flow-pack, the temperature range in which the film seals reliably determines the line speed.
- Twist retention: In twist wrapping, the film must stay twisted; film that springs back causes the wrapper to open.
- Slip and stiffness: These allow the film to run through the machine without snagging.
- Print compatibility: Important for brand graphics and print registration (alignment).
Common Film Types
In addition to single-layer films, confectionery packaging also uses laminated films in which different layers are combined. Metallized layers improve the light and moisture barrier; transparent films keep the product visible. Which one to choose depends on the product's shelf-life target and the desired brand appearance.
Machine-Side Settings
When a new film is tried, the sealing temperature, pressure and time are readjusted. With printed films, the photocell is set so that the pack length aligns with the print. Being able to save these settings as recipes speeds up product changeovers.
Run a trial on your packaging machine before changing film suppliers: two films sold under the same name can behave very differently on the machine.
You can read this article on the differences between flow-pack and twist wrapping, and discuss your packaging needs with us.
Let's find the right solution for your project
Tell us what you need and we will propose the most suitable machine or manufacturing solution.