Stainless Steel in Food Machinery: The Difference Between 304 and 316

AISI 304 and AISI 316 are the two stainless steel grades most commonly used in food machinery. Thanks to its molybdenum content, 316 is more resistant to corrosion, but it is not necessary for every machine part.

Using stainless steel on product-contact surfaces has become standard for both hygiene and durability. However, "stainless" is not a single material; the grade is chosen according to where it is used.

The Key Difference

PropertyAISI 304AISI 316
CompositionChromium and nickelChromium, nickel and approximately 2–3% molybdenum
Corrosion resistanceGood for general useBetter in chloride, salty and acidic environments
CostLowerHigher
Typical useBody, frame, dry product-contact surfacesSalty and acidic products and aggressive cleaning chemicals

When Is 316 Needed?

Molybdenum increases resistance to pitting corrosion, which occurs especially in chloride-containing environments. 316 is preferred for machines that handle salty and acidic products, undergo frequent and intensive chemical cleaning, or are installed in humid, salty environments such as coastal areas.

Is 316 Required Everywhere?

No. In many machines that process dry, low-acidity products such as confectionery, 304 provides sufficient resistance. The right approach is to decide separately for each area of the machine: product-contact areas, areas washed down with liquids and the outer body can be made of different grades.

What Matters as Much as the Material

  • Surface finish: A rough surface traps dirt and can initiate corrosion; product-contact surfaces must be smooth.
  • Weld quality: If welds are not made and cleaned properly, they become the first place where corrosion starts.
  • Material certificate: The grade of the sheet and tubing used should be traceable through documentation.

We also explain how we select materials for our machines in our article on hygienic design.

Share

Let's find the right solution for your project

Tell us what you need and we will propose the most suitable machine or manufacturing solution.

Get a Quote