Lollipop Production: From Candy Rope to Candy on a Stick

Lollipops are produced by adding a stick inserting station to a hard candy line. It is possible to make both hard candy and lollipops on the same line; the difference lies in the cutting and stick placement stage.
Lollipop production uses the first stations of a rope-formed hard candy line unchanged: cooking, cooling table, pulling, batch roller and rope sizing. Once the rope has been reduced to the desired diameter, what remains is to insert the stick securely into the product.
What Happens at the Stick Inserting Station?
The stick inserting machine separates product-length pieces from the continuously incoming rope, pushes a stick into each piece and gives the product its final shape. For the stick to sit firmly in the candy, the mass must still be plastic at this moment; mass that has cooled too much will not hold the stick, while mass that is too hot cannot keep its shape. This is why the distance and speed matching between rope sizing and stick inserting are important.
Mold and Shape
The shape of the lollipop (round, flat, figured) is determined by the mold set in the stick inserting head. When the mold is interchangeable, different products can be made on the same machine. Mold changeover time is an important selection criterion for producers with a wide product range.
Stick Selection
- Plastic stick: Sturdy and uniform; it causes few feeding problems on the machine.
- Paper stick: Preferred by brands that want to reduce plastic use; since it can be affected by moisture, storage conditions require attention.
Changing the stick type also affects the setup of the feed hopper and the pushing mechanism, so the type of stick to be used should be specified from the outset when selecting the machine.
Cooling and Packaging
The product on a stick is packaged after it hardens in the cooling tunnel. Lollipops are usually individually wrapped in twist wrap or flow-pack. The stick protruding from the pack is a detail that must be taken into account when choosing the wrapping machine.
For a business that wants to make hard candy and lollipops on the same line, the key question is: how quickly can it switch between the cutting and stick inserting stations?
You can review our stick inserting machine on its product page and see the complete line on the Rope-Formed Hard Candy Line page.
Let's find the right solution for your project
Tell us what you need and we will propose the most suitable machine or manufacturing solution.