What Is a Pressure Test Unit? The Basics of Leak and Strength Testing

Pressure test units check whether pipes, tanks, valves and pressure equipment leak and whether they withstand their design pressure. The type of test is chosen according to the part being tested and the applicable standard.

Every part that operates under pressure must be tested before it goes into service, for both safety and quality reasons. Pressure test units make it possible to carry out these tests in a controlled, repeatable and documented way.

Types of Tests

  • Strength (proof) test: The part is held at a test pressure above its working pressure for a specified time; there must be no permanent deformation or damage.
  • Leak test: Checks whether the part leaks, using methods such as pressure decay, flow measurement or tracer gas.
  • Burst test: Used in design verification to determine the pressure at which the part fails; it is not a series production check.

Hydrostatic or Pneumatic?

In a hydrostatic test, the part is filled with a liquid such as water and pressurized. Because liquids are incompressible, very little energy is stored inside; if the part fails, the risk of a sudden explosion is low. This is why hydrostatic testing is generally preferred for high-pressure strength tests.

A pneumatic test uses air or gas. It is sensitive at finding small leaks and is preferred when the part must not get wet; however, because compressed gas stores a lot of energy, it requires additional safety measures.

What Should a Test Unit Include?

  • A controlled pump or regulator that raises pressure in stages and holds it steady,
  • Calibrated pressure gauges and data logging,
  • A safety valve and an enclosure that protects the test area,
  • Test results reported against the part number.
A test result is more than a "pass"; the pressure, the duration and the measuring instrument used must all be on record.

You can review our pressure test unit on its product page, and contact us for a custom solution for the part you need to test.

Share

Let's find the right solution for your project

Tell us what you need and we will propose the most suitable machine or manufacturing solution.

Get a Quote